Fluke SimpliFiber Pro - Battery Installation, Life, and Status

Battery Installation, Life, and Status
7
Battery Installation, Life, and Status
AA
IEC LR6
NEDA 15A
AA
IEC LR6
NEDA 15A
Note: Fluke Networks recommends alkaline batteries.
ffl03.eps
Figure 1. Installing the Batteries
Table 2. Battery Life and Low Battery Indicators
Meter >50 hours
(blinks continuously)
Multimode source 40 hours
LOW BATTERY LED
blinks conti
nuously
2
Singlemode sources 30 hours
FindFiber source >80 hours LED blinks
continuously
Device
Battery
Life
1
Low Battery Indicator
1. Typical. See the specifications.
2. The LOW BATTERY LED blinks occasionally if auto power-off
is disabled. See page 12.