Fluke SimpliFiber Pro - 1490;1625 nm Singlemode Source Specifications

Specifications
41
1490 nm/1625 nm Singlemode Source
DFB laser: dual 1490 nm/1625 nm
1490 nm: ±3 nm
1625 nm: ±5 nm
1490 nm: 1 nm (maximum)
1625 nm: 1 nm (maximum)
1490 nm/1625 nm: ≥ -3 dBm (typical)
±0.25 dB over 8 hours
Yes. Can be enabled or disabled by the user.
Fixed SC
Yes. Fixed at ID 3.
CW (continuous wave), 2 kHz, auto-wavelength
Emitter type
Central wavelength
Spectral width (RMS)
Minimum output power
Power output stability
1
Auto dual-wavelength switching
Optical output connector
FindFiber ID generation
Modes
1. 23°C ±2°C, after 5 minutes of warm-up time.