Memory Functions
33
Uploading Records to a PC
1
Install the latest version of LinkWare software on your
PC.
2
Turn on the meter.
3
Connect the meter to the PC with the USB cable
provided, as shown in Figure 14.
4
Start LinkWare software on the PC.
5
Click Import on the LinkWare tool bar; then select
SimpliFiber Pro.
6
Enter project information; then click OK.
7
Import all records from the meter or select records to
import.
Note
The meter’s record numbers are in the Cable ID
colu
mn in LinkWare.
8
To delete all records in the tester, select Utilities >
SimpliFiber Pro > Delete All Tests in Memory.
USB cable
ffl22.eps
Figure 14. Connecting to a PC
To Next Page
Loading...
