TiS55+/TiS75+
Users Manual
24
To disconnect from a connected tool:
1. On the Imager, tap the tool.
2. Tap Forget.
The tool shows on the Available Tools list. The tools on the My Tools list will re-order, if
necessary.
3. Select On.
To disconnect all tools, restart the camera.
If the tool goes out of range, the tool shows no reading. On the My Tools list, the tool shows
as not connected. Tap the tool to acknowledge (OK) or remove the tool (Forget Tool).
Connection Icons
Icons show the status of the Product connection. Tab le 1 4 explains the icons.
Table 14. Connection Icons
Icon Description
No icon
WiFi is not on.
In a menu, the Product is attempting to connect to a WiFi network.
The Product is connected to a WiFi network.
WiFi is on, but the Product is not connected to a WiFi network.
In a menu, shows beside the network name that the Product is connected to.
WiFi is on, and the Product is attempting to connect to a Fluke Connect
account.
Or,
Images are saving to a Fluke Connect account.
WiFi is on, and the Product is connected to a Fluke Connect account.
The Product is not connected to a Fluke Connect account.
WiFi is on, and the Product is attempting to connect to a shared folder on a
network server.
Or,
Images are saving to a shared folder.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
