Thermal Imager
Settings Menu
35
3. The Imager will take images as configured.
Start temperature trigger Auto Capture:
1. Postion the camera and set the markers and spot boxes as required.
2. Select s > Capture Settings > Start Capture.
(appears on the display.
The Imager will take images when the temperature of the marker, center point, or spot
box reaches the trigger condition.
Bluetooth Headset
Connect a Bluetooth Headset to support audio features.
To connect a Bluetooth Headset:
1. Put the Bluetooth Headset into pairing mode.
2. On the Imager, select s > Bluetooth Headset > On.
The Imager starts to scan and presents a list with of available devices. You can expect a
short delay before the scan is complete.
Tap the headset to select it.
The headset willl connect and show on the My Devices list. A headset icon displays in
Camera mode.
Date
The date shows as: MM/DD/YY or DD/MM/YY.
To set the date:
1. Select s > Date.
2. Select MM/DD/YY or DD/MM/YY.
3. Push s to set the new format.
4. Select Set Date.
5. Push s to open the Set Date menu.
6. Push
/
to select Day, Month, or Year.
7. Push
/
to change the day, month, or year.
8. Push s to set the date and exit the menu.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
