3
Flygt guarantees that a spare parts stock will be kept
for 15 years after the manufacture of this product has
been discontinued.
The manufacturer reserves the right to alter perfor-
mance, specification or design without notice.
Official approval applies only providing:
— that the product is used under condition
described in the care and maintenance
instructions and in applications for which it
is intended;
— that the monitoring equipment incorporated
in the product is correctly connected;
— that all service and repair work is done by a
workshop authorized by Flygt;
— that genuine Flygt parts are used.
GUARANTEE
The explosion proof version (Ex-approved) is
designed for use in explosive environments in
accordance with approvals stated on page 4.
Thermal contacts must always be
used on Ex-approved machine due
to approval conditions.
All work on the explosion-proof
motor section must be performed by
personnel authorized by Flygt.
Flygt disclaims all responsibility
for work done by untrained,
unauthorized personnel.
NOTES FOR EXPLOSION
APPROVED MACHINES
Flygt undertakes to remedy faults in products sold by
Flygt provided:
— that the fault is due to defects in design, materials
or workmanship;
— that the fault is reported to Flygt or Flygt’s repre-
sentative during the guarantee period;
— that the product is used only under conditions de-
scribed in the care and maintenance instructions
and in applications for which it is intended;
— that the monitoring equipment incorporated in the
product is correctly connected;
— that all service and repair work is done by a work-
shop authorized by Flygt;
— that genuine Flygt parts are used.
Hence, the guarantee does not cover faults caused by
deficient maintenance, improper installation, incorrect-
ly executed repair work or normal wear and tear.
Flygt assumes no liability for bodily injuries, material
damages or economic losses beyond what is stated
above.
According to rules the Ex-approved
machine must always work com-
pletely submerged in the liquid.