•
Override schedule
•
Spot cutting
4.3.1 Main area
Main area
is the standard operating mode where
the product mows and charges automatically.
4.3.2 Secondary area (2nd area)
To mow secondary areas the operating mode
Secondary area (2nd area)
must be chosen. In
this mode, the operator must move the product
manually between the main area and the
secondary area. The product mows until the
battery is empty. When the battery is empty, the
product stops and the message
Needs manual
charging
shows in the product display. Put the
product in the charging station to charge the
battery. When the battery is charged, the product
moves out of the charging station and stops. The
product is now prepared to start operation, but
needs confirmation from the operator first.
Note:
If you want to cut the main area after the
battery is charged, set the product to
Main area
mode before placing it in the charging station.
4.3.3 Park
Operating mode
Park
means that the product
returns to the charging station where it remains
until a different operating mode is selected.
4.3.4 Park / Schedule
Operating mode
Park / Schedule
means that the
product returns to the charging station where it
remains until the next schedule or standby
permits operation. Refer to
Schedule and
Standby on page 33
.
4.3.5 Override schedule
The schedule settings can be temporarily
overridden by selecting
Override schedule
. It is
possible to override the schedule for 3 h. It is not
possible to override a standby period.
4.3.6 Spot cutting
The
Spot cutting
function is activated with the GO
button and is useful for quickly mowing an area
where the grass has been mown less than in
other parts of the yard. You must manually move
the product to the selected area.
Spot cutting means that the product mows in a
spiral pattern in order to cut the grass in the area
where it was started. When this is done, the
product automatically switches back to
Main area
or
Secondary area
.
4.4 To stop the product
1. Push the STOP button on top of the product.
The product stops and the blade motor stops.
4.5 To switch off the product
1. Push the STOP button.
2. Open the hatch.
3. Push the ON/OFF button for 3 seconds.
4. The product shuts down.
32
- Operation
1392 - 001 -
To Next Page
Loading...
