Installation manual US01B.M8 / US04B.M8
17.02.2017
3
2 Safety instructions
All safety related regulations, local codes and instructions that appear in the manual or
on equipment must be observed to ensure personal safety and to prevent damage to
the equipment connected to it. If equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
Do not stress the equipment over the specification limits neither during assembly nor
operation. To do so can be potentially harmful to persons or equipment in the event of a
fault to the equipment.
2.1 Presentation of safety information
The following safety symbols appear in this manual.
2.1.1 Danger that could result in minor or moderate injuries
Danger, warning, caution
Failure to follow wiring instructions in this manual may result in
equipment damage or personal injury.
2.1.2 Note regarding proper function
Note
Note regarding roper operation
Simplification of operation
Ensuring function
To Next Page
Loading...