44 | P a g e
WARNING: RE-USING OLD BATTERIES OR MIXING OLD AND NEW
BATTERIES IN THE IN-CAR UNIT MAY DAMAGE THE ELECTRONICS.
9 Trouble Shooting Guide
• Unable to pair FOBO TIRE 2 In-Car unit
o Make sure the battery is installed correctly and battery tab is removed.
o Press side button on the in-car unit until hear a beep sound and LED
flashing at top center of the in-car unit.
o Make sure your smartphone has Bluetooth 4.0 (Smart Ready)
capability. NOTE: BLUETOOTH 2.0 OR 3.0 WILL NOT
WORK WITH THIS DEVICE.
o Please check if the FOBO TIRE 2 has been paired before to another
FOBO account. You’ll need to “Release” the FOBO TIRE 2 set from
the FOBO account that it is paired to, before using on your account.
The FOBO TIRE 2 is designed to pair with one FOBO account only
for theft deterrent feature.
o Try to do a hard reset on the phone.
o Try by turning off/on your smartphone bluetooth.
• Unable to get readings from FOBO TIRE 2 sensors after removing the
battery tab.
o Try by removing the sensor battery – wait for 15 seconds – insert
back.
10 FOBO TIRE 2 Specifications
FOBO TIRE 2 sensor Specification:
• Bluetooth: v5.0
• Transmit Conducted Power: +5.0dBm (sensor)
• Receiver Sensitivity: Conducted Sensitivity -97dBm @ 0.1%BER
• Antenna Return Loss: Typical -9dB
• Operating Frequency: 2.402~2.480 GHz
• Battery Type: CR1632 (sensor). Operating life up to 1 year. (NOTE: The
battery operating life varies according to usage and climate temperature)
• Operating Temperature: -40°C to +85°C (sensor), -20°C to +60°C
(sensor with common CR1632 batteries)
• Weight: 7.6g (sensor –with battery)
• Sensor Dimension H x D: 13.8mm x 20.2mm
• Maximum Pressure: 800kPa (116psi)
To Next Page
Loading...
