FOBO TIRE 2 - Warning

45 | P a g e
• ESD: 8kV air discharge & 4kV direct contact discharge according to CE
standard
• Operating Humidity: up to 90% non-condensing at 40oC
• Dust and Water Proof: IEC60529 compliant to IP57(sensor)
• Sensor structural threshold: 100N ball pressure intensity test
• Mechanical & Environmental Reliability Testing Standards: IEC 60068-
2-2, IEC 60068-2-1, ISO 21750, IEC 60068-2-29, IEC 60068-2-5, IEC
60068-2-32, ISO 15184, ISO 2409, SAE J2657, SAEJ113/13
FOBO TIRE 2 In-car unit Specification:
• Weight: ~44.6g (In-Car – without batteries)
• In-Car unit Dimension HxWxL: 25mm x 48mm x 85mm
• Battery Type: AA (In-Car). Operating life up to two years. (NOTE: The
battery operating life varies according to usage and climate temperature).
• Operating Temperature: -20°C to 65°C (In-Car)
11 Warning
• Take note that FOBO TIRE 2 is not meant to function as anti-accident or
anti-injury device. FOBO TIRE 2 is not a substitute for safe tire
maintenance practices. Please take full responsibility of your own safety
while driving. And continue to send your car for regular tire check and
maintenance.
• Please take extra precaution to acoustics safety when operating the FOBO
TIRE 2 In-Car unit. Note that placing the FOBO TIRE 2 In-Car unit
beeper close to your ear may result in injury to the ear or permanent loss
of hearing.
• You shall not use the FOBO TIRE 2 in any unlawful way that violates
any laws.
• Avoid exposing the FOBO TIRE 2 In-Car unit and sensors to solvent, fire
or extreme temperatures.
• FOBO TIRE 2 may fail to function properly if the battery is below
optimum level. Replace the battery immediately to continue enjoying full
features of FOBO TIRE 2.