INSTALLATION INSTRUCTIONS
Preliminary Notes Before Installation
This appliance is an Inset Live Fuel Effect appliance that provides radiant warmth utilis-
ing the latest type burner technology.
The fire is designed to fit various types of fireplaces and natural draught flues as listed in
the Installation Requirements.
The appliance must be installed by a competent person in accordance with Gas Safety
(Installation and Use) Regulations 1998. It is strongly recommended that a CORGI regis-
tered engineer be used for this purpose.
Read all these instructions before commencing installation.
This appliance must be installed in accordance with the rules in force and only used in
a sufficiently ventilated space.
The appliance is designed for installation on to a non-combustible hearth of at least
300mm depth.
This appliance is factory set for operation on the gas type, and at the pressure stated on
the appliance data plate.
Multiflue Inset
Aura Multiflue
To Next Page
Loading...
