EasyManua.ls Logo

Focal Point Fuego User Manual

Default Icon
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION, SERVICING
AND USER INSTRUCTIONS
Revision A - 07/03
Country(s) of destination - GB,IE
All iinstructions mmust bbe hhanded tto tthe uuser ffor ssafekeeping
Fuego
Focal Point Fires plc, Avon Trading Park, Christchurch, Dorset BH23 2BT
Tel: 01202 499330 Fax: 01202 499326
www.focalpointfires.co.uk
e-mail: sales@focalpointfires.co.uk
Question and Answer IconNeed help?

Do you have a question about the Focal Point Fuego and is the answer not in the manual?

Focal Point Fuego Specifications

General IconGeneral
Fuel TypeElectric
Voltage120V
Wattage1500W
Remote ControlYes
Adjustable FlameYes
Adjustable ThermostatYes
Overheat ProtectionYes
Warranty1 Year Limited
Ignition TypeElectric

Summary

INSTALLATION INSTRUCTIONS

1.0 IMPORTANT NOTES

Regulatory Compliance and Safety

Details installation regulations, standards, and safety aspects like ceramic fibre.

2.0 APPLIANCE DATA

3.0 INSTALLATION REQUIREMENTS

4.0 SITE REQUIREMENTS

Opening Dimensions and Hearth Specifications

Specifies required dimensions for the fireplace opening and hearth for safe installation.

5.0 VENTILATION

8.0 PREPARING THE APPLIANCE

9.0 PREPARING THE OPENING

10.0 GAS SUPPLY ROUTING

11.0 FITTING THE FIREBOX

14.0 TESTING AND COMMISSIONING

14.1 SETTING PRESSURE

Procedure for checking and setting the gas pressure using a U gauge.

14.2 OPERATING THE FIRE

Explains the operation of the control knob for lighting and flame adjustment.

14.4 FLUE SPILLAGE MONITORING SYSTEM

Details the ODS safety device and troubleshooting for shutdowns.

14.5 TESTING FOR SPILLAGE

Describes how to perform a flue spillage test using a smoke match.

15.0 SERVICING

Servicing Procedure Steps

A step-by-step guide for performing routine maintenance on the appliance.

16.0 TROUBLESHOOTING GUIDE

Pilot Ignition and Flame Issues

Common problems related to pilot ignition, flame, and burner operation.

Operational Faults and Smells

Addresses issues like flame shrinkage, cutting out, and unusual smells during operation.

1.0 IMPORTANT NOTES (User Instructions)

2.0 CLEARANCES TO COMBUSTIBLES

3.0 VENTILATION

4.0 OPERATING THE FIRE

6.0 FLUE SPILLAGE MONITORING SYSTEM

ODS Safety Device Function

Details the operation of the ODS safety device and actions upon shutdown.

Related product manuals