l!t1§111
fi,ii@ihr
Arm led:
Light
on under armed status,
Light
flashes under stay status.
Disarm
led: Light on
under
disarmed
status
Trouble led:
Light
on when with
zone
trouble. Light flashes when
AC
cut.
Alarm led:
Lightflashes
when alarm.
~
Press 3 seconds
to
tirgger
fire alarm
Press 3 seconds
for
medical help
Press 3 seconds
for
SOS
Press 3 seconds then
enter
user
code
to
enable
or
disable
delay
zone doorbell(
Refer
to
page
36)
Press 3 seconds then
enter
user
code
to
enable
or
disable PGM
output(
refer to page
30)
Press 3 seconds
to
enter
or
exit
sleep mode.
[I]
, Press 3 seconds then
enter
user
code
to
enable
or
disable
eletrical
switch.
: Press 3 seconds then
enter
user
code
to
bypass zones
or
activate zones.
Press 3 seconds then
enter
user
code
to
proceed normal testing,
siren testing and
walk
testing.
Press 3 seconds
to
make phone call through GSM, the longest
talk
time
is 240 seconds. the call will be interrupted when alarm
occurs.
Sleep mode: all led indicators, backlight, voice, remind tone will
be
disabled
under
sleep
mode, The panel will
exit
sleep mode automatically when users
enter
system setting
or
when alarm occurs.
Bypass zone: bypassed
zones
means zones disabled. The bypass will be
restored when users disarm systems
under
home
armed
or
armed status.
Communication test: To
test
the
communication between
the
panel and
the
CMS
if
normally
Siren test: to
test
if
siren working normal
Walk
test:
to
test
if
the
detectors
are
working normally with
the
panel and alarm
To Next Page
Loading...
Need help?
General