14141
..
fi.ii@n•.,,
To
arm the panel. The zone number will be also display on the LCD
screen.
At
this
time arm system
is
not
allowed unless you force arm.
2.3.2 The
control pane can power 15V, 1
OOmA
to
detectors.
The
max curent
is 1
OOmA.
Do not exceed 1
OOmA,
otherwise please use extra power
supply.
2.4
Install wireless detector
2.4.1 As the
detector's
manual says,install coded detector in the area 150m
from the control panel.Please
test
and make sure detector can
work
with
control panel normally.
2.4.2 Wireless repeater function:when wireless detector
is
too
far
from the
panel
or
some occluders between panel and
detector
which disable the
panel receivethe signal from wireless detector.Now you can choose
our
made wireless repeater
to
achieve wireless signal relay trans milting.
To Next Page
Loading...
Need help?
General