444 9160 / 444 9180 / 442 9020
E 219 GB - Issue 1
68
2 COLUMNS , 2 MOTORS LIFT CHECKING LIST OF VERIFICATION OPERATIONS
Year 1 Year 2 Year 3 Year 4 Year 5 Year 6 Year 7 Year 8 Year 9 Year 10
1
Check of bearing nuts wear ..............................
2 Check of clearance between carriage and column ..
3 Check of door protectors ...................................
4 State and adjustment of toothed belts ....................
5 State of potentiometers......................................
6 State and efficiency of inertia brakes ..................
7 State and tension of drive belts ..........................
8 State of undercar rubber grips ..........................
9 Presence of rubber grip retaining circlips ............
10 Check of arm parts sliding & efficiency of thrust stop
11 State and efficiency of arm’s locking device ........
12 Presence and state of foots protection device ........
13 Presence of circlip on each axis arm ...................
14 State of control boxes .......................................
15 Correct operation of upper limit switch ................
16 Correct operation of lower limit switch .................
17 Check of up and down control ..........................
18 Check of tightening of column fixing anchors .......
19 Check of safety regulation’s display ...................
20 Test of lift loaded .............................................
21 State of cables and cables protections ................
22 Detection status of potentiometers .......................
23 Wear level of the upper bearing .......................
To Next Page
Loading...