Foif A20 - Rover Station Setup

receiver
UHF antenna
telescopic pole
controller
bracket
Notice:
1. If telescopic pole is used, height of receiver
can be got directlly from the pole.
2. Comfirm that connection between bracket
and controller is tight to avoid that controller
dropping to the ground.
3. If network is used, then UHF antenna does not
need to fix on A20.
Picture showing
real-time
rover station
setup
A20 User Manual
Process:
1. Thread the receiver onto the pole.
2. Attach the controller bracket to the pole.
3. Insert the controller into the bracket.
3.5 Rover Station
12