EasyManua.ls Logo

Follett L82639 - User Manual

Follett L82639
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HCD1010R/N, HMF1010R/N, HCD1410R/N, HMF1410R/N 1
HCD1010R/N, HCD1410R/N, HMF1010R/N, HMF1410R/N
Horizon Elite™ Ice Machines (Remote Condensing)
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Operation and Service Manual
After Serial Number L82639
Order parts online
www.follettice.com
01096122R12

Table of Contents

Questions and Answers

  • J
    jasonadamsSep 14, 2025
    Why is my Follett Ice Maker blinking Lo water, power, time delay?
    • A
      Alexandria AlvarezSep 14, 2025
      If your Follett Ice Maker is blinking Lo water, power, or time delay, it could be because the machine did not detect water consumption while trying to make ice. Verify refrigerant pressures, ensure the compressor is running, and check that the sight glass is clear. Another possible cause is a lack of refrigeration due to low refrigerant charge or a leak. Clean the probes and reservoir of any debris.
  • W
    Wesley WatersAug 25, 2025
    Why is my Follett Ice Maker not making ice but showing HI AMPS?
    • E
      Emily DuncanAug 25, 2025
      The ice machine might not be making ice and showing HI AMPS due to several reasons: * Poor water quality may cause ice to jam the auger. To resolve this, clean the ice machine, increase flushing frequency, and position the TDS switch to the High TDS setting. * A damaged shuttle mechanism could be the cause. In this case, replace or repair the shuttle mechanism. * There may be an intermittent drive output from the PC board, causing the evaporator to freeze. Replacing the PC board should fix this. * The gearmotor might be unplugged. Ensure it is properly plugged in.
  • J
    Jacqueline HernandezAug 26, 2025
    Why is my Follett L82639 Ice Maker not making ice and showing HI PRESSURE?
    • M
      Megan AndersonAug 26, 2025
      If your Follett Ice Maker isn't making ice and shows 'HI PRESSURE', it could be due to several reasons. High ambient temperatures (above 100°F or 38°C) can cause this issue; try to air condition the area to below this temperature. Poor ventilation or air recirculation can also be a factor; reposition the ice machine or improve ventilation, ensuring the exhaust doesn't recirculate. A clogged condenser (for air-cooled models) may be the cause; clean the condenser grille. If it's a water-cooled model, ensure water flows through the condenser. Finally, check the fan: remove any blockage from the fan blades, replace the PC board if there's no fan output, or replace the fan motor if it's faulty.
  • T
    Tyler TranDec 1, 2025
    What to do if my Follett L82639 is not making ice and shows 'Lo water'?
    • L
      Lisa MooreDec 1, 2025
      If your Follett Ice Maker isn't producing ice and displays a 'Lo water' error, it could stem from several issues related to the water supply. The water supply might be insufficient, or there could be low water pressure. A defective water feed solenoid valve stuck in the closed position, no water feed output from the PC board, a plugged screen on the inlet side of the fill solenoid, or a plugged check valve could also be responsible. Here's what you can do: 1. Restore the water supply and check the water filters; you might need to press the reset button to restart the ice machine if the evaporator was completely empty. 2. The ice machine should start when the water reaches the normal low level if the issue is just low water pressure. 3. Replace the water feed solenoid valve if it's defe...
  • V
    Victor ColeSep 15, 2025
    What to do if Follett L82639 is not making ice and shows HI AMPS?
    • M
      Melissa KennedySep 15, 2025
      If your Follett Ice Maker displays a HI AMPS error and isn't making ice, it could be due to several reasons. Poor water quality may cause ice to jam the auger, so clean the ice machine, increase flushing frequency, and position the TDS switch to High TDS setting. Another cause could be a damaged shuttle mechanism, in which case you should replace or repair it. An intermittent drive output from the PC board can also freeze the evaporator, so replacing the PC board may be necessary. Finally, check if the gearmotor is unplugged and plug it in if needed.
  • D
    Dakota ColemanSep 23, 2025
    What does it mean when my Follett Ice Maker displays 'SERVICE' and doesn't make ice?
    • V
      victorcaseySep 23, 2025
      If your Follett Ice Maker is not making ice and displaying a SERVICE message, it could be due to an internal water leak touching the chassis sensor. Identify and repair the leak. Clean/dry the chassis and sensors, then restart the machine.
  • C
    Christopher DiazSep 7, 2025
    Why is my Follett L82639 Ice Maker not making ice and showing HI AMPS?
    • A
      anthony03Sep 7, 2025
      If your Follett ice machine isn't making ice and is displaying a HI AMPS error, here's what could be happening: * Poor water quality might be causing ice to jam the auger. To resolve this, clean the ice machine, increase the flushing frequency, and adjust the TDS switch to the High TDS setting. * A damaged shuttle mechanism could be the culprit. Consider repairing or replacing it. * An intermittent drive output from the PC board might be causing the evaporator to freeze, leading to the HI AMPS error. Replacing the PC board may fix this. * The gearmotor might be unplugged. Ensure it is properly plugged in.
  • J
    Jenna ClarkSep 8, 2025
    Why does my Follett Ice Maker say TIME DELAY without a full bin?
    • D
      David ParksSep 9, 2025
      If your Follett Ice Maker is in TIME DELAY mode without a full bin, check the following: * Ice jamming due to an improperly installed transport tube could be causing a false shuttle. Correct the transport tube routing. * The shuttle might be stuck in the up position. Repair or replace the shuttle mechanism. * A damaged or improperly installed thermostat (open) could be the issue. Replace or reposition the thermostat. * The transport tube could be backed out of the coupling. Correct the coupling installation.
  • L
    Luis WyattSep 23, 2025
    What does it mean when Lo water, power, and time delay are blinking on my Follett L82639 Ice Maker?
    • J
      jimenezlaurenSep 23, 2025
      If you observe blinking 'Lo water', 'power', and 'time delay' lights on your Follett ice maker, it suggests that the machine did not detect water consumption while attempting to make ice or there is a lack of refrigeration/low refrigerant charge/leak. Verify refrigerant pressures, ensure the compressor is running, and check if the sight glass is clear. Also, clean the probes and reservoir of any debris.
  • M
    Matthew VasquezAug 31, 2025
    How to troubleshoot a Follett Ice Maker that is running but not making ice?
    • A
      Angela ThomasAug 31, 2025
      If your Follett Ice Maker is running but not producing ice, several components could be defective. It might be a defective compressor, start relay, start capacitor, run capacitor, or main contactor. You may need to replace the compressor, start relay, start capacitor, run capacitor, or main contactor, respectively. Another possible cause is no output from the PC board, in which case you should replace the PC board.

Follett L82639 Specifications

General IconGeneral
BrandFollett
ModelL82639
CategoryIce Maker
LanguageEnglish

Related product manuals