EasyManua.ls Logo

Fora D10 - Page 30

Fora D10
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Preparing the puncture site
Stimulating blood perfusion by rubbing the puncture site prior to
blood extraction has a signicant inuence on the glucose value
obtained.
Blood from a site that has not been rubbed exhibits a measurably
different glucose concentration than blood from the nger. When the
puncture site was rubbed prior to blood extraction, the difference
was signicantly reduced.
We recommend you perform disinfection procedures between each
patient. Please refer to the section Cleaning and Disinfection Pro-
cedures for complete instructions. After disinfection, used gloves
should be removed and hands washed before proceeding to the
next patient.
Please refer to the following practice guidelines for more information
about the correct procedure:
● Biosafety in Microbiological and Biomedical Laboratories (BMBL)
found at http://www.cdc.gov/biosafety/publications/bmbl5/
“Protection of Laboratory Workers From Occupationally Acquired
Infections; Approved Guideline-Third Edition” Clinical and
Laboratory Standards Institute (CLSI) M29-A3.

Other manuals for Fora D10

Related product manuals