34
Step3
Apply blood into the test strip. When “ ” ashes
on the display, hold and touch the absorbent hole
of test strip to the drop of blood until the conrma-
tion window is completely lled.
Step4
Read a result. Your test result, along with Date/
Time, appears after the monitor counts down to
0. It will automatically be stored in the monitor
memory. Turn the monitor off by removing the test
strip. Discard the used test strip carefully to avoid
contamination.
Step5
Discard lancet. Remove the lancing device cap
and the lancet. Place the disk on a hard surface
and push the exposed needle tip into the protec-
tive disk. Always use caution when removing
the lancet.
WARNING!
The used lancet and test strip may be potentially biohazardous. Please
refer to your healthcare provider and discard them carefully. Or contact our
local customer service for more information.
To Next Page
Loading...
