58
What happened?
Cuff inates again during measuring.
POSSIBLE CAUSE
Cuff is not fastened.
Normal action.
WHAT TO DO
Fasten the cuff again.
What happened?
A result is higher/lower than user’s average measurement.
POSSIBLE CAUSE
May be not in correct position while
measuring.
Blood pressure naturally varies from
time to time.
WHAT TO DO
Adjust to the correct position to
measure.
Keep in mind for next measure-
ment.
If user’s blood pressure is higher than the default
value, the device will automatically pump to a higher
pressure. Stay relaxed and wait for the measure-
ment.
To Next Page
Loading...
