16
Configuring the lambda.7 under macOS
6.1 Installing the software
The Force Dimension development folder must be installed onto your system before the lambda.7
can be used. To do this, perform the following steps:
1. Plug the Force Dimension USB flash drive into your Apple computer.
2. Open the sdk-<version>.dmg file for your version of macOS from the \macOS folder and
extract the sdk-<version> folder to the desired location (typically your home folder).
This will create a sdk-<version> development folder in the target location.
6.2 Installation description
The development folder contains the following directories:
\bin subfolder
This directory contains the demonstration executables and the binary files required to run the
lambda.7 software.
\examples subfolder
This directory contains the demonstration programs. Example applications described in section
7.4 and come with their full source code.
\doc subfolder
All documentation files and notices are located in this subfolder.
\manuals subfolder
All hardware user manuals are located in that directory.
\lib,\include subfolders
These directories contain the files required to compile your application with the Force Dimension
SDK. Please refer to the online programming manual for more information (see subfolder\doc).
6.3 Installing the drivers
The macOS version of the Force Dimension SDK uses Apple’s native USB drivers. No further instal-
lation is required.
To Next Page
Loading...