ForceDoor BASE 35 - Page 16

14
position limit again to ensure door drive
works properly.
 Press and hold SET button for
about 6 seconds to enter main
menu until “0.-” appears on the
display then release the button.
 Press UP till “2.-” appears on the
display.
 Press “ SET ” into the operating
parameter setting menu, digital
displays “2.0”
 Press UP till “2.1” appears on the
display
 Press SET to enter the door
opening speed adjustment menu,
High speed, 100% of standard door opening
speed,50% of soft closing speed
High speed, 90% of standard door opening
speed,40% of soft closing speed
Medium speed, 80% of standard door
opening speed,50% of soft closing speed
Low speed, 70% of standard door opening
speed,40% of soft closing speed
Remark：
After quick setting the door drive,AAS
function automatically select the most
optimized speed for the door already.
When you change the speed manually in
this menu,you have to set the travel
position limit again to ensure door drive
works properly.
 Press and hold SET button for
about 6 seconds to enter main
menu until “0.-” appears on the
display then release the button.
 Press UP till “2.-” appears on the
display.
 Press “ SET ” into the operating
parameter setting menu, digital
displays “2.0”
 Press UP till “2.2” appears on the
display
 Press SET to enter the Soft closing
distance adjustment,
Door opening speed adjustment
Soft closing distance adjustment