37. Remove the protective caps and connect the automatic transmission oil cooling lines to the radiator
connectors. Tighten to 20 Nm (15 lb-ft).
38. NOTE: The fan clutch has left-hand threads, so it must be turned counterclockwise for
installation and tightening.
Position the accessory drive belt over the front of the engine. Carefully lower the fan shroud and the
fan and clutch assembly into the vehicle. Using Strap Wrench D85L-6000A or equivalent, install the
fan clutch assembly. Tighten the fan to 53 Nm (39 lb-ft).
39. Position the fan shroud into the lower retainers and install the upper retaining bolts. Tighten to 7 Nm
(62 lb-in).
40. Install the accessory drive belt.
Install the radiator overflow hose to the radiator. Install the upper radiator hose and position the
Item Part Number Description
1 3F671 Belt Idler Pulley
2 19D629 A/C Compressor
3 3D673 Power Steering Pump Pulley
4 6B209 Drive Belt Tensioner
5 6312 Crankshaft Pulley
6 8A528 Water Pump Pulley
7 10300 Generator
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B40.HTM~gen~ref.HTM
To Next Page
Loading...
