Ford 1997 Ranger - Pistons and Connecting Rods; Piston and Connecting Rod Disassembly; Piston and Connecting Rod Assembly

DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Pistons and Connecting Rods
Disassembly
1. Remove connecting rod bearing (6211) from connecti
ng rod (6200) and cap.
2. Remove partial piston ring set using a suitable piston ring expander.
3. Mark connecting rod and cap to ensure assembly with the same piston (6108) and installation in the
same cylinders from which they were removed.
4. Using an arbor press and Piston Pin Removal and Replacer T68P-6135-A, press the piston pin from
the piston and connecting rod.
Section 03-01B: Engine, 3.0L V-6 1997 Aerostar, Ranger Workshop Manual
Item Part Number Description
1 — Press Ram
(Part of T68P-6135-A)
2 6135 Piston Pin
3 — Receiving Tube
Page
1
of
4
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B45.HTM~gen~ref.HTM
tomsn048@gmail.com