ADJUSTMENTS
Valve Clearance
1. With No. 1 piston on TDC at the end of compression stroke (Position No. 1 in the illustration) check
the following valves:
Position 1
No. 1 exhaust valve (6505) No. 1 intake valve (6507)
No. 3 exhaust valve No. 2 intake valve
No. 6 exhaust valve No. 4 intake valve
2. Rotate crankshaft 360 degrees to position No. 2 and check the following valves:
Position 2
No. 2 exhaust valve No. 3 intake valve
No. 4 exhaust valve No. 5 intake valve
No. 5 exhaust valve No. 6 intake valve
Section 03-01B: Engine, 3.0L V-6 1997 Aerostar, Ranger Workshop Manual
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B49.HTM~gen~ref.HTM
To Next Page
Loading...
