Ford 1997 Ranger - Page 173

 On V-6 engines with one rod per pin, both sides of rod have larger chamfers.
4. NOTE: Make certain piston floats during installation operation.
Start the piston pin in the piston and connecting rod (this may require a very light tap with a mallet).
Using an arbor press and Piston Pin Remover/Replacer T68P-6135-A, press the piston pin through
the piston until the piston pin is centered in the piston.
Page
3
of
4
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B45.HTM~gen~ref.HTM
tomsn048@gmail.com