Ford 1997 Ranger - Page 81

19. Position flywheel (6375) on the crankshaft. Tighten to specification.
20. Install crankshaft pulley. Install and adjust drive belt to specification. Refer to Section 03-05 .
21. Remove engine from the work stand and install in vehicle.
Page
5
of
5
1997 Aerostar/Ranger
2011
-
04
-
27
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B28.HTM~gen~ref.HTM
tomsn048@gmail.com