THE HYDRAULIC
SYSTEM
SECTION B
General instructions
1.
External cylinders are operated by oil drawn from the
rear transmission
housing.
Although the quantity of oil available is
sufficient for normal
operation with most
implements, it may be necessary to add oil if several
remote cylinders are operated
together.
2. Any
external cylinder
which
is disconnected
when extended means a loss
of
oil
and
this should be replaced by adding a corresponding
quantity
to
the rear transmission.
3.
All hoses should be cleaned
before connecting and the open ends of all
hoses should be covered with dust caps when not in use.
-
To Next Page
Loading...
