How To Ride Your Ford Bronco
®
eBike
14
Turning your eBike on and off
Ensure the bike is sufficiently charged.
Press ENGINE START STOP switch to activate you bike.
Switching Power Assist (PAS) levels
Using the handlebar control switch, short press the
“+” button to increase the assist level; short press
the “-” button to decrease the assist level.
Press and hold the walk-mode button to activate walk
mode. Release the walk-mode button to stop.
Your Ford Bronco
®
eBike has four Power Assist levels:
Eco, Normal, Sport, Baja. Normal is the default power assist level.
Lights
Auto headlight mode can be set. Light settings are manually
controllable (sequentially) via handlebar control switch.
Single press the control light switch to cycle
between low and high beam settings.
The position light will remain on if auto
headlight mode is toggled ON.
4/ How to Ride
To Next Page