1. Use the arrow buttons on the steering
wheel to enter the main menu.
2. Select the first programme time list.
3. Highlight the day on which the heater
should warm up the vehicle.
4.
Press the OK button.
5. Continue in the same way to select all
the days on which the heater should
warm up the vehicle.
6. To set the time at which the vehicle
should be warmed up, highlight the
time at the top of the display and
press the OK button. The hours start
to flash.
7. Adjust the hours and minutes as
necessary.
You can use the second programme time
list to set a second cycle, for example
different times on different days or twice
on the same day. The programming
procedure is the same as for the first
programme timer..
Diesel auxiliary heater
(depending on country)
The diesel auxiliary heater (PTC electrical
heater) aids in warming the engine and
the vehicle interior on vehicles with a
diesel engine. It is switched on or off
automatically depending on the outside
air temperature, the coolant temperature
and the alternator load.
108
Climate control
To Next Page
Loading...
Need help?
General
