KEYLESS ENTRY
General information
WARNING
The keyless entry system may not
function if the key is close to metal
objects or electronic devices such
as mobile phones.
The passive entry system will not function
if:
•
The vehicle battery is flat.
•
The passive key frequencies are
jammed.
•
The passive key battery is flat.
Note:
If the passive entry system does
not function, you will need to use the key
blade to lock and unlock your vehicle.
The keyless system allows the driver to
operate the vehicle without the use of a
key or remote control.
Passive locking and unlocking requires a
valid passive key to be located within one
of the three external detection ranges.
These are located approximately one and
a half metres from the driver and front
passenger door handles and the luggage
compartment lid.
Passive key
The vehicle can be locked and unlocked
with the passive key. The passive key can
also be used as a remote control. See
Locking and unlocking (page 38).
Locking the vehicle
WARNING
The vehicle does not lock itself
automatically. If the locking function
is not activated, the vehicle will
remain unlocked.
Touch a front door handle lock sensor to
lock the vehicle.
To activate central locking and arm the
alarm:
•
Touch a front door handle lock sensor
once.
To activate double locking and arm the
alarm:
•
Touch a front door handle lock sensor
twice within three seconds.
Note:
There must be clearance between
each touch of the door handle.
42
Locks
To Next Page
Loading...
Need help?
General
