Attaching a child seat with top
tethers
WARNINGS
If your vehicle is equipped with the
comfort seat system, install the
ISOFIX seat only when the outboard
seat is in the forward position. After
installing the ISOFIX seat, do not move the
seat to the comfort position as it could
interfere with the tether strap routing.
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Note:
Where applicable, remove the
luggage cover to ease installation. See
Luggage covers (page 162).
WARNING
Make sure that the top tether strap
is not slack or twisted and is
properly located on the anchor
point.
1. Route the tether strap to the anchor
point.
To Next Page
Loading...
Need help?
General
