Antenna PositionsMaximum output power Watt
(Peak RMS)
Frequency
Band MHz
1, 2, 310 W1710 – 1885
1, 2, 310 W1885 – 2025
Note:
After the installation of RF
transmitters, check for disturbances from
and to all electrical equipment in the
vehicle, both in the standby and transmit
modes.
Check all electrical equipment:
•
with the ignition ON
•
with the engine running
•
during a road test at various speeds.
Check that electromagnetic fields
generated inside the vehicle cabin by the
transmitter installed do not exceed
applicable human exposure requirements.
283
Appendices
To Next Page
Loading...
Need help?
General
