Driving
135
[GF09600(ALL)12/95]
10-1/2 pica
art:0001265-A
The positions of the floor-mounted gearshift
[GF09700(ALL)12/95]
Always push the clutch pedal all the way to the floor when you
shift. You should upshift according to the speeds given in the
shift speed chart.
%
*
[GF09800(ALL)01/96]
Backing up
*
[GF09900(ALL)01/96]
To shift into R (Reverse):
*
[GF10000(ALL)12/95] 1. Completely stop your vehicle.
*
[GF10100(ALL)12/95] 2. Depress the clutch pedal to the floor and place the gearshift
lever in the Neutral position. Do not release the clutch pedal.
[GF10200(ALL)12/95]
NOTE: If the following step is not followed, a grinding noise
may occur.
[GF10300(ALL)12/95] 3. Wait a minimum of three seconds before attempting to shift
into R (Reverse) gear.
[GF10400(ALL)12/95] 4. Push the gearshift lever completely to the right, pull up the
ring on the stalk of the gearshift lever, and then pull
rearward on the gearshift lever to engage the R (Reverse)
gear.
[GF10500(ALL)12/95] 5. If the R (Reverse) gear is engaged, slowly release the clutch
pedal from the floor.
File:09cdgfz.ex
Update:Fri May 24 08:25:56 1996
To Next Page
Loading...
Need help?
General
