Ford Pro 48A - Reassembly and Final Steps

US Type Charger 48A Installation Manual Rev0.1
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
23
Conduit
Torque
1 “
35 kgf·cm
30.36 lbf·in
2-6. Reassemble cover and Front cover then Fasten M4 screw.
Screw
Torque
M4
15 kgf·cm
13 lbf·in
3.5 Adjust Max. Output Current
Please contact Ford Pro to offer remote current derate support.
1. Adjust Max. Output Current from Web Portal
Figure 3-12 Modify Current in Max. Amperage FW Setting field and press “Apply”
button.