•
Connect the positive (+) terminal of
the battery plus connection with the
positive (+) terminal of the battery on
the other vehicle (cable C).
•
Connect one end of the negative
connection cable to the engine block
or the engine mount of your vehicle.
Connect the other end to the other
vehicle, as far away as possible from
the battery to the engine block or the
engine mount (cable D).
CAUTIONS
Do not connect to the negative
(–) terminal of the flat battery.
Make sure that the jump leads are
clear of any moving parts.
To start the engine
•
Run the engine of the other vehicle at
moderately high speed.
•
Start your engine.
•
Run both engines for a minimum of 3
minutes before disconnecting the
leads.
CAUTION
Do not switch on the headlamps
when disconnecting the cables. The
peak voltage could blow the bulbs.
•
Disconnect the cables in the reverse
order.
104
Vehicle battery
To Next Page
Loading...
Need help?
General
