ParkP
ReverseR
NeutralN
DriveD
3rd Gear3
2nd Gear2
1st Gear1
WARNING
Apply the brakes before moving the
selector lever and keep them
applied until you are ready to move
off.
Note:
A cold engine has a higher idle
speed. This will increase the tendency for
your vehicle to creep when you have
selected a drive gear.
Press the button on the selector lever to
select reverse and park.
The selector lever position will be shown
in the information display.
Park
WARNINGS
Select park only when your vehicle
is stationary.
Apply the parking brake and select
park before leaving your vehicle.
Make sure that the selector lever is
latched in position.
Note:
An audible warning will sound if you
open the drivers door and you have not
selected park.
In this position, power is not transmitted
to the drive wheels and the transmission
is locked. You can start the engine with
the selector lever in this position.
Reverse
WARNING
Select reverse only when your
vehicle is stationary and the engine
is at idle speed.
Neutral
In this position, power is not transmitted
to the drive wheels but the transmission
is not locked. You can start the engine
with the selector lever in this position.
Drive
Select drive to shift automatically through
the forward gears.
70
Transmission