WARNING
If any of the following conditions
cannot be met, do not use the tow
bar and have it inspected by
properly trained technicians.
Before starting your journey, make sure
that the tow ball arm is properly locked.
Check that:
•
The tow ball is correctly locked.
•
The protection cap is correctly fitted.
•
The tow ball arm is fully engaged in its
seat.
Removing the tow ball arm
1. Remove the protection cap.
2. Insert the key and turn it
anti-clockwise.
3. Remove the lock.
4. Push the lever to the left and hold it.
5. Push the lever fully forwards until the
tow ball arm is unlocked.
6. Remove the tow ball arm.
7. Install the protection cap.
8. Install the plug in the seat.
Driving without a trailer
1. Remove the tow ball arm.
2. Install the plug into its seat.
WARNING
To avoid risk of injury, never unlock
the tow ball arm with the trailer
attached.
80
Towing