Ford TAURUS 2013 - Moving the Air Filter Assembly (Ecoboost Engine)

Moving the Air Filter Assembly (EcoBoost engine)
WARNING: Do not run engine with the air filter
disconnected.
1. Shut the engine off.
2. Clean the area around the clamp
that connects the air filter assembly
to the rubber hose (1).
3. Remove the bolt cover
(if equipped).
4. Remove two bolts that attach the air filter assembly to the front of the
vehicle (2).
5. Loosen the clamp holding the air filter assembly to the rubber hose (1).
6. Remove the harness retaining clip by pulling up (3). Do not
disconnect the sensor (4).
302 Maintenance
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)