4. Open the hood.
5. Support the hood with the hood strut.
Closing the Hood
1. Remove the hood strut from the catch
and secure it correctly in the clip.
2. Lower the hood and allow it to drop
under its own weight for the last
20–30 cm
Note: Make sure that the hood is correctly
closed.
UNDER HOOD OVERVIEW - RWD
Windshield washer reservoir
*
. See Washer Fluid Check (page 144).A
Brake and clutch fluid reservoir (right-hand drive). See Brake and Clutch Fluid
Check (page 143).
B
Engine oil dipstick
*
. See Engine Oil Check (page 142).C
141
Transit (TTG) Vehicles Built From: 05-07-2014, Australia, EK3J-19A321-BDA (CG3612enAUS) enAUS, Edition date: 06/2014, First Printing
Maintenance
To Next Page
Loading...
