The AC power point is used for powering
electrical devices that require up to 150
watts. It is located under the parking brake
lever.
Note: Do not keep electrical devices or
adaptors plugged in to the AC power point
when not in use.
When the green indicator light located on
the AC power point is:
• On — AC power point is ready to supply
power.
• Off — AC power point is not ready to
supply power; ignition is not switched
on.
• Flashing — AC power point is in fault
mode.
If the 150 watts limit is exceeded the AC
power point will be temporarily turned off.
The indicator light will flash if the power
point detects overloading, overheating, or
shorting conditions. For overloaded or
shorted conditions unplug your device and
switch the ignition off then back on. For an
overheated condition let the system cool
down and switch the ignition off then back
on.
The AC power point is not suitable for use
with all electrical devices, for example:
• Tube type televisions.
• Vacuum cleaners.
• Power tools.
• Compressor-driven refrigerators.
• Medical or measuring equipment that
must process precise data.
• Appliances requiring an extremely
stable power supply, for example:
• Microcomputer-controlled electric
blankets.
• Touch sensor lamps.
84
Transit (TTG) Vehicles Built From: 05-07-2014, Australia, EK3J-19A321-BDA (CG3612enAUS) enAUS, Edition date: 06/2014, First Printing
Auxiliary Power Points
To Next Page