Drills
Steel, long-lasting Cobalt & Diamond Step Drills are
used to drill wood, precious metals, mild steel, bone,
and mother of pearl. Diamond Plated & Cobalt Steel
Twist Drills, made of wire gauge steel with diamond
coating, are used to drill extremely fine holes in stone,
ceramics, tile, glass, and hard metals. New Cobalt
Steel Pilot Drills make starter holes in most metals.
Premium Steel Carving Drills are used for internal
carving of wood, acrylic and plastic.
Plated and Sintered
Diamond Points and Discs
are used to remove stock from extremely hard
materials such as tungsten and tantalum carbide
cutting tools, dies and molds, broaches, and for
grinding and shaping stone, glass and precious
metals, fiberglass, reinforced plastics, PVC and
ceramics. Sintered diamonds last far longer than
plated diamonds and can be re-sharpened as desired
with a wet dressing stone to expose new
diamond particles.
Sanding Drums, Bands, and Discs
These are used for removing rust, smoothing rough
sur fac es and for sanding jobs on wood, plastic and
metal. (Avoid using too much pressure which will
cause clogging or a build-up on the work surface.)
For best results, use medium speeds for coarser
grits and larger di am e ters. Use higher speeds for
finishing work or with smaller sizes. Unique 3M
Ceramic Purple Coated Abrasive Bands and Discs
contain patented Cubitron
TM
ceramic aluminum oxide
mineral that sharpens itself with use. They last 2 to 4
times longer than traditional aluminum oxide discs
and remove material faster with less heat and loading.
Cotton or Felt Bobs and Buffs
Solid Felt Buffs or Bobs are used in combination
with gritty or smooth compounds for a variety of
buffing and polishing operations on plastic, wood,
and metal. They vary in shape and come in three
hardnesses — medium, hard, and rock hard.
Loosely-stitched Soft Cotton Buffs are used for deli-
cate work on precious metal and during polishing
operations. Generally use high speeds for cutting
down and buffing. Medium speeds are used for
more delicate, precise work and for polishing.
Brushes
Miniature Power Brushes are generally used on
metal surfaces and hard-to-reach areas. They are
ideal for deburring, surface finishing, edge blend-
ing, roughening to create a good bonding surface,
and general cleaning. Use high speeds for cleaning
and deburring. Medium speeds are needed when
cleaning hard-to-reach areas and edge blending.
Compounds
Foredom has seven different compounds. In
addition to Emery, Tripoli, and Red and White
Rouges, there is unique Platinum Blue for pre-
polishing and cutting down platinum and other
metals, and for final polishing unique Platinum
White (8000 grit) that produces a deep luster on
platinum, other metals, and acrylics. Carnauba is
the hardest wax available. It produces a high
luster on wood and painted surfaces.
2″ Wheels and Discs
for Angle Grinder Attachment
Foredom continues to expand its offerings of
several types of wheels with 3/8
″
arbor holes for
grinding, deburring, shaping, and cutting on
various materials. Also new are screw lok type
accessories, psa backed abrasive discs, screens
and velcro heads for sanding on wood, metal,
plastic, glass, stone and more.
These accessories work with Foredom’s Angle
Grinder Attachment
for use on H.30
®
, H.30H,
or H.30SJ
Chuck-Style Handpieces. It is
excellent for a broad range of sanding,
polishing and finishing work
.
Bur and Tool Holders
Foredom has three rotating bur holders and two
small holders with covers. Two of the rotating
models have center cups for holding small tools
such as files and screwdrivers. A bur holder is
the perfect companion product for your collec-
tion of burs, drill bits, and other accessories of
various size shanks.
Foredom's Accessory Catalog features the right
accessories for your specific applications.
Accessories may be purchased from your local
dealer or directly from Foredom. Contact:
Foredom Electric Company,
16 Stony Hill Road, Bethel, CT 06801
Phone: (203)792-8622
s Fax: (203)796-7861
Visit us online at www.foredom.net.
11
To Next Page
Loading...
