Forest-Master FM9DD - Page 8

Forest Master Models: FM9DD/FM14DD/FM18DD8
Assembly
5. Place the engine (8) on top of the base (1), lining the engine mounting holes with the bolt holes of the
base. Note that the base is drilled with the holes to fit all three engines. See the diagrams below for the
correct holes.
6. Fasten the engine (8) with the M10 bolts (48), M10 washers (47), M10 spring washers (49) and M10 nuts
(50). The order of assembly is from below is:
[Bolt] – [Washer] – [Base] – [Engine] – [Washer] – [Spring Washer] – [Nut].
1
48
48
48
48
47
47
47
47
47
47
47 47
49
49
49
49
50
50
8
FM18DD
FM14DD
FM9DD