FORESTADENT TRACK P - Page 24

24
GB
Select foil:
The list of foils contains all foils of the FORESTADENT product range that can be used with this device and that have been availa-
ble at the time of production of this unit. (Example, Track
®
A, thickness 1.0 mm ).
Functions of this display
1.) Select „list of foils“ 3.) Select „1.0 mm“2.) Select „Track
®
A“ 4.) Selected foil2.1) Browse list of foils
back menu continue
selected foil
rated temperature cooling time
change rated temperature
and cooling time
menu save as favourite
one step backwards OK, next step
Change factory settings for foils:
The rated temperature and cooling time can be changed for one single thermoforming process or constantly as favourite.
The rated temperature (factory presetting) can only be changed by maximum +/- 5 °C. The changes are done in the window
„selected foil“ or „favourite“, also see “select foil” and “save favourites”. (Page 24, 27).
1.) Select „change“ 2.) Change
„rated temperature“
3.) Change „rated cooling time“
save
abort
4.) Thermoform or save
as favourite
Thermoform one time
with the changed data.
Save as favourite. As
favourite the changed
data and the foil name
will remain.