22
INSTRUCTIONS AND METRICS
FORME tracks certain metrics during a workout (heart rate, caloric burn, etc.).
These are to be taken as general indicators and are provided for reference.
They are not to be taken as guidance.
GENERAL SAFETY TIPS
When engaging with the Studio Lift resistance arms, we always recommend:
• Keep all young children, pets and objects away from the Lift during use
• Use two hands any time you are moving the Lift arms
• Support the arms till they lock into position
• Ensure the accessories are always securely attached to the quick release
• Set a passcode to limit unintended use of the Lift arms
• When adjusting the Lift arms, make sure that the cable is fully retracted on
each arm before moved
• Stowing your arms is the safest position to leave your machine. The quick
release and cable remain operational when FORME is not in use and the arms
are unstowed
TURNING YOUR LIFT ON AND OFF
To wake your Studio Lift, simply tap on the screen. To power down, tap the Sleep
button when you’ve nished your workout session. The Sleep button is located
on the session summary screen, and in the Control Center.
In the rare case when a power cycle is needed, follow these steps:
Find the lower access door on the right side of your Studio Lift.
Tap the top of that door, and it will tilt out.
Remove the door and set it aside. Inside the door is a rocker switch. Simply ip
that switch to power your Studio Lift o or on. If you have trouble
reaching the switch, just grab a pen. If your Lift is o, just ip the switch in the
other direction to turn it back on.
Power
Button
STUDIO | Using the Studio Lift
To Next Page
Loading...
Need help?
General