25
ADJUSTING HEIGHT
Each of the arms on the Studio Lift has two
buttons. One has a line, and the other has a circle.
The button with the line allows you to adjust the
height. Press the Height button and hold it down.
On the screen, you’ll see the height unlock. The
current position of the arm will be outlined in
black, and the intended destination will appear as
a dotted outline. As you move the arm, the current
position will track till you arrive at the destination
position. The cables should be fully retracted
before you move an arm. Remember to always use
two hands when adjusting the arms.
Continue to hold the button while you support the
arm with your other hand. Now move the arm up
or down. change to: You can then move the arm
up or down to your desired height. When you have
the arm at your desired height, release the button.
For safety purposes, we only allow you to change
the position of one arm at a time.
STUDIO | Using the Studio Lift
To Next Page
Loading...
Need help?
General