To Next PageTo Next PageWhy is the weld deposit stringy and incomplete with my Forney Welding System?
If the weld deposit is stringy and incomplete when using your Forney Welding System, it is because the torch was moved over the workpiece too quickly or the gas mixture is incorrect. Move the torch slower and consult the shielding gas table.
General| Input Voltage | 120V |
|---|---|
| Input Current | 20A |
| Output Current Range | 30-140A |
| Duty Cycle | 20% @ 90A |
| Model | 140 MIG |
| Processes | MIG (GMAW) |
| Welding Thickness | 24 gauge - 1/4 in |
Key specifications and capabilities of the 140 MIG Welder.
Information on how to contact Forney customer service for assistance.
Details on the length and types of coverage for welder components.
References to key safety standards applicable to welding.
Required protective gear for welding operations.
Risks associated with welding fumes and necessary ventilation.
Measures to prevent fires and explosions during welding.
Critical warnings and procedures to prevent electric shock.
Step-by-step guide for loading welding wire.
Recommended settings for various materials and thicknesses.
Explanation of the welder's main control panel functions.
Table of common issues, causes, and solutions.
