Fortinet FortiFone - IP Address Configuration; Subnet Mask Configuration

Using your Phone with FortiVoice 12 FortiFone™ QuickStart Guide
Conference call
Press the Right navigation button, then press the Conf. softkey to put the
first party on hold. Call the second party (for external calls, first access an
outside line). Press the Join softkey to connect to all parties.
Screened transfer
Press the button + <extension> (or outside number) + ?. To complete
the transfer, press the Transfer softkey or hang up. To cancel transfer,
press the EndCall softkey and then the Resume softkey to connect to the
caller on hold.
Blind transfer
Press the button + <extension> (or outside number) + Dial softkey, then
hang up. If an extension is tied to a programmable key, then during the
call, press that key to transfer.
Voicemail transfer
Press the button + _ + <extension> + Dial softkey, then hang up.
Park a caller
Press the programmed Park key. Otherwise, press the button +
_GA: + ?. The system will respond with a parking orbit.
Retrieve a parked caller
At the dial tone, press the programmed UnPark key, then dial orbit + ?.
Otherwise, dial __ + orbit + ?.
Two-way intercom/group paging to FortiVoice phones
Press the programmed Intercom or Group Page key + <extension> + Dial
softkey. Otherwise dial _KF (Intercom) or _KG (Paging) + extension
+ ?.
Attach account code to last call
At dial tone, dial _KK + ?. When prompted, enter <Account code>
+ ?. CDR logging must be active.


