Fortinet Fortigate 100D Install Guide

FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide
54 01-30004-0265-20070831
Configuring the modem for the FortiGate-50A Configuring the modem interface
Table 15: CLI commands for the FortiGate-50A
passwd2
<password_str>
Enter the password used to access the
specified dialup account.
No default.
passwd3
<password_str>
Enter the password used to access the
specified dial-up account.
No default.
peer_modem1
{actiontec |
ascendTNT |
generic}
If the modem at phone1 is Actiontec or
AscendTNT, select that type, otherwise leave
setting as generic. This setting applies to
models 50AM, 60M, and WiFi-50BM only.
generic
peer_modem2
{actiontec |
ascendTNT |
generic}
If the modem at phone2 is Actiontec or
AscendTNT, select that type, otherwise leave
setting as generic. This setting applies to
models 50AM, 60M, and WiFi-50BM only.
generic
peer_modem2
{actiontec |
ascendTNT |
generic}
If the modem at phone3 is Actiontec or
AscendTNT, select that type, otherwise leave
setting as generic. This setting applies to
models 50AM, 60M, and WiFi-50BM only.
generic
phone1
<phone-number>
Enter the phone number required to connect to
the dial-up account. Do not add spaces to the
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dial-up account.
No default.
phone2
<phone-number>
Enter the phone number required to connect to
the dialup account. Do not add spaces to the
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dialup account.
No default.
phone3
<phone-number>
Enter the phone number required to connect to
the dialup account. Do not add spaces to the
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dialup account.
No default.
redial
<tries_interger>
Set the maximum number of times (1-10) the
FortiGate unit dials the ISP to restore an active
connection on the modem interface. Select
none to allow the modem to redial without a
limit.
No default.
status {disable |
enable}
Enable or disable modem support. disable
username1
<name_str>
Enter the user name used to access the
specified dial-up account.
No default.
username2
<name_str>
Enter the user name used to access the
specified dialup account.
No default.
username3
<name_str>
Enter the user name used to access the
specified dialup account.
No default.

Fortinet Fortigate 100D Specifications

General

Brand	Fortinet
Model	Fortigate 100D
Category	Firewall
Language	English