Fortinet FortiGate 4000 - Assigning a RIP Filter List to the Outgoing Filter

RIP configuration Adding RIP filters
FortiGate-4000 Installation and Configuration Guide 173
Assigning a RIP filter list to the outgoing filter
The outgoing filter allows or denies adding routes to outgoing RIP update packets.
You can assign a single RIP filter list to the outgoing filter.
To assign a RIP filter list to the outgoing filter
1 Go to System > RIP > Filter.
2 Add RIP filter lists as required.
3 For Outgoing Routes Filter, select the name of the RIP filter list to assign to the
outgoing filter.
4 Select Apply.